Edge Profiles
The finish that frames your Cambria surface.
Every edge is cut and polished by hand in our Piscataway fabrication shop. The profile you choose shapes both the look of your countertop and its installed investment — more intricate profiles carry a higher fabrication multiplier, shown alongside each option.
Cambria Edge Profiles
Every Cambria edge, from modern to architectural.
Cambria's complete edge profile collection — organized by style category. Each profile is cut and polished by hand in our Piscataway fabrication shop.
Modern
Classic
Architectural
Modern
Ledge Edge (MD)
×1.04Industry term: Reversed Bevel · Available depths: 3cm
The bevel edge features a diagonal cut along the top of the countertop, typically at a 45-degree angle. It's a sharp, angular cut that gives a more distinct, defined look than the eased edge.
Double Treeline Edge (A+R)
×1.06Industry term: Double Bevel · Available depths: 3cm (+4cm)
The double bevel edge features a diagonal cut along the top and bottom of the countertop.
Treeline Edge (Z+S)
×1.04Industry term: Bevel · Available depths: 3cm (+4cm)
The bevel edge features a diagonal cut along the top of the countertop. It's a sharp, angular cut that gives a more distinct, defined look than the eased edge.
Seacliff Edge (Z)
×1.00Industry term: Eased Edge · Available depths: 1cm, 2cm, 3cm (+4cm)
The eased edge is the simplest and most popular edge profile. It features a straight, square line with slightly softened, rounded corners.
Ridgeline Edge (TR3)
×1.00Industry term: Straight Edge · Available depths: 2cm, 3cm (+4cm, +6cm)
The straight edge is exactly as it sounds: a sharp, clean, right angle with no curves or rounding at all with a bold profile that has a 1/8 radius.
Classic
Glacial Edge (FZ)
×1.18Industry term: Ogee Edge · Available depths: +4cm
The ogee edge features a combination of convex and concave curves, creating a distinctive, S-shaped design. This edge is often more elaborate than others, with an ornate, elegant profile.
Volcanic Edge (V)
×1.08Industry term: Bullnose / Full Bullnose · Available depths: 2cm, 3cm (+4cm, +6cm)
A bullnose edge is rounded over the entire edge, creating a soft, smooth curve. This edge profile is fully rounded on the top and bottom.
Summit Edge (T)
×1.02Industry term: Eased Edge · Available depths: 1cm, 2cm, 3cm (+4cm)
This edge profile is fully rounded on the top and bottom.
Piedmont Edge (A)
×1.05Industry term: ½ Bullnose / Demi Bullnose / ¼ Round · Available depths: 2cm, 3cm (+4cm)
Softly rounded on the top edge. This edge profile is fully rounded on the top and bottom.
Architectural
Bryn Edge (VF)
×1.28Industry term: Reversed Waterfall Edge · Available depths: +4cm
Waterfall edges are bold and highly modern, offering a seamless, flowing look from top to bottom that's perfect for creating a high-end, luxury feel.
Boulder Edge (F+V)
×1.32Industry term: Waterfall Edge · Available depths: +4cm
Waterfall edges are bold and highly modern, offering a seamless, flowing look from top to bottom that's perfect for creating a high-end, luxury feel.
Shale Edge (1Z)
×1.10Industry term: Straight Edge · Available depths: 2cm, 3cm (+4cm)
A clean, architectural profile with a subtle step detail for a modern, refined look.
Rimrock Edge (Miter)
×1.30Industry term: Mitered Edge · Available depths: +4cm, +6cm
A 45° mitered joint lets the surface drop to the floor in a seamless waterfall — the statement profile for modern islands.